SUPER TUCANO

Fully 3D printable scale RC airplane developed by René Marschall

  • Wingspan/Lenght: 1300 mm (51.2 inches)

  • Flight weight: 2080 g

  • Wingload: 82g/dm2

  • 6-channel: (gas, aileron, elevator, rudder, nose wheel)

  • Material: PLA approx. 1500 g/TPU approx. 100 g

  • Motorization: 3S or 4S

  • Printer space of 200x200x200 cm needed

  • Note: The slicing works only with CURA! look here why…

The AT-29 Super Tucano is a two-seater training aircraft of the Brazilian manufacturer Embraer. We have tried to make this aircraft as true to the original as possible as an RC model. Although the wings, rudder and elevator are not enlarged, our Super Tucano has absolutely uncritical, very pleasant flight characteristics. To achieve this, we have used a relatively thin airfoil. 

This is also one of the reasons (besides the higher cost and weight) why we did not use a retractable landing gear. The Planeprint Super Tucano has a fixed landing gear that is almost entirely 3D printed. 

Our Tucano has several design innovations, such as the internally ventilated spinner, a new frame design for the inside of the fuselage or the TPU-decoupled front and main landing gear.

INNOVATIVE FEATURES OF OUR TUCANO

Download our free PRINTING & CONSTRUCTION MANUAL, here you can see exactly what to expect before you decide to buy the STL data.

MANUAL V1.0 FREE TO DOWNLOAD

tucano-titel.jpg
  • m-facebookpicto
  • instapicto
  • Youtube

© 2019 – All rights reserved by PLANEPRINT Innsbruck Austria • mail

FAIR_USE.jpg