Fully 3D printable RC airplane designed and developed by René Marschall

  • Wingspan: 2000 mm (78.7 inches)

  • Flight weight: from 650 grams

  • Wingload: from 19g/dm2

  • 2, 3 or 4-channel

  • Motorization: 3S

  • Material: LW-PLA 500g/PLA 50g/TPU 10g

  • Printer space of 200x200x200 mm (cube) needed!

  •  NOTE  Slicing only works with CURA! look here why…
Planeprint Rise1-glider.jpg

The Planeprint Rise is a high-performance thermal glider that can convert the slightest air movement into altitude. The aerodynamic design is inspired by the R.E.S. competition scene. It is controlled with elevator and rudder only, but don't worry, you won't miss the aileron. The perfect elliptical wing shape, which transitions smoothly into vertical winglets, makes the V-tail control commands extremely direct and dynamic. Thanks to the low wingload of 19 grams/dm2 achieved with the help of LW-PLA, the glider feels like a sheet of paper in the air.

The Rise's smooth flight characteristics make it suitable for beginners to a certain extent, but the thin fuselage requires very soft landings. But especially the experienced pilot is addressed, who is looking for a model with flight performance that is quite comparable with expensive competition models. Flying the Rise is pure fun.

EXPLO Rise.jpg

You can buy the Planeprint Rise in the basic set as a pure glider. If you want to add a motor or a wing spoiler, there is a motor/spoiler upgrade kit. You can find both sets in our shop.


NEW: Version 2.0 with removable nose and for larger motors up to Ø 28 mm!


Download our free PRINTING & ASSEMBLING MANUAL, here you can see exactly what to expect before you decide to buy the STL data.


PDF MANUAL V1.3.1 free for download

We are constantly improving the manuals. Check if you have the latest version.

Here are some new spare parts for your Rise. It's worth taking a look …